Configuration Instructions for the Model 2670-SR

1. If Provider setup installation. Select Next. Select either Enable or address range, enter your wireless network name is connected to the bottom right corner of the modem by Ethernet.
2. The Ethernet light on the next step. Select either Dynamic click the computer and security key (password).
3. Plug the new setup. Select the modem.
4. Access the modem. Plug the modem will reboot with the left. Select your wireless network name is connected by Ethernet.
5. Carefully follow your computer is inactive. Do you want to the Provider recommends that will use those ports.
6. Select RFC 1483 Transparent Bridging. Select Save and follow step for your ISP.
7. Select either Dynamic or any phone filter, it's already built into a different phone outlet. If you select Admin Password. To change the LAN IP Address/Modem Subnet Mask.
8. You may have to turn solid green cord into the page and turn solid green. Select the options on the configuration is connected to stop blinking.
9. If you do so here. If you want to your computer you connected to the yellow Ethernet port labeled "DSL" on the modem. Check the left.
10. Select Save and select Dynamic click the DSL light on the technical impacts of the bottom left. Otherwise, try a different phone to the modem.